Sullair VS16 50HP Series - Page 60

Section 6
MAINTENANCE
54
6.9 TROUBLESHOOTING - GUIDE (CONTINUED)
SYMPTOM PROBABLE CAUSE CORRECTIVE ACTION
EXCESSIVE FLUID
CONSUMPTION
Clogged return line strainer(s) Clean strainer(s) (screen and o-ring replace-
ment kit available).
Clean orifice(s) if so equipped.
Separator Element Damaged or
Not Functioning Properly
Change separator(s).
Leak in the Lubrication System Check all pipes, connections and components.
Excess Fluid Foaming Drain and change.
Fluid Level Too High With machine off, drain to proper level.
Vacuum System Inlet Vacuum
Too Low
Consult factory.