Need help?Do you have a question about the Sulzer XFP PE1 and is the answer not in the manual?
General| Brand | Sulzer |
|---|---|
| Model | XFP PE1 |
| Category | Water Pump |
| Language | English |
Details the suitable applications and liquids for XFP pumps and restrictions.
Explains the coding system for pump identification and its components.
Specifies mandatory PPE for installation, operation, and service of pumps.
Covers ATEX approvals and general information for motors in Ex zones.
Guidelines for operating Ex pumps with frequency inverters in ATEX zones.
Details information found on pump nameplates for identification and certification.
Illustrates and lists the key design components of PE1 and PE2 pump models.
Illustrates and lists the key design components of PE3 pump models with cooling jackets.
Provides weight specifications for XFP pumps at 50 Hz, including components.
Provides weight specifications for XFP pumps at 60 Hz, including components.
Details safe practices and requirements for lifting XFP pumps and components.
Covers safe methods for transporting XFP pumps, including vertical and horizontal lifting.
Specific instructions for safely lifting the pump vertically.
Specific instructions for safely lifting the pump horizontally.
Explains the requirements and methods for equipotential bonding in pump installations.
Describes different methods for installing the pumps, including submerged, dry, and transportable.
Details the process and components for installing pumps in concrete sumps.
Explains the procedures and considerations for dry installation of pumps.
Details the function and connection of the leakage sensor for seal monitoring.
Outlines conditions and requirements for operating pumps with frequency inverters.
Provides diagrams for electrical connections for various pump models and frequencies.
Crucial step to verify correct impeller rotation direction for safe operation.
Overview of maintenance, warranty, and service requirements for XFP pumps.
Details how to drain and fill the lubricant in PE1 and PE2 pump seal chambers.
Instructions on how to adjust the bottom plate clearance for optimal performance.
Procedures for operators and service personnel to address pump blockages.
A guide listing common faults, their causes, and recommended fixes.
To Next Page
