Need help?Do you have a question about the Sulzer ABS XFP-PE6 and is the answer not in the manual?
General| Type | Submersible sewage pump |
|---|---|
| Applications | Wastewater, sewage, drainage |
| Motor power | 6.0 - 11 kW |
| Maximum submersion depth | 20 m |
| Material | Cast iron |
| Voltage | 400 V |
| Frequency | 50 Hz |
| Protection Class | IP68 |
| Impeller type | Vortex |
| Outlet size | 80 mm |
| Liquid temperature | 0°C to 40°C |
Ensures proper operation and immediate action for faults.
Function and importance of the leakage sensor for seal monitoring.
Specific installation methods and options for XFP pumps.
Procedures for installing AFLX and VUPX pump series.
Guidelines for safe and correct electrical connections.
Explains terminal and wire designations for connections.
Procedure for verifying correct pump rotation direction.
How to integrate seal monitoring into the control panel.
Steps and checks before starting the pump/station.
General advice and precautions for pump maintenance.
Safety warnings and procedures for pump removal from wet/dry installations.
To Next Page
