Need help?Do you have a question about the Sulzer ABS AFC 0831 and is the answer not in the manual?
General| Impeller Type | Vortex |
|---|---|
| Type | Submersible |
| Seal Type | Mechanical Seal |
| Outlet Diameter | 65 mm |
| Operating Temperature | Max. 40 °C |
Details suitable liquids and installation regulations for sewage pumps.
Specifies ATEX explosion-proof motor execution.
Safety and operational guidelines for EX pumps in hazardous areas.
General technical specifications including noise level.
Explains the pump's nameplate information for ordering and reference.
Refers to detailed safety instructions booklet and contact for questions.
Guidelines for safe handling and lifting of the pump unit.
Explains the DI probe for seal monitoring and immediate action if activated.
Details thermal sensors protecting the motor from overheating according to DIN 44082.
Describes optional PTC thermistor bearing monitors for thermal protection.
Covers regulations for sewage applications and EX motors, including cable sealing.
Provides a diagram and labels for a typical pump installation setup.
Specifies regulations and installation requirements for the discharge line.
Instructions for verifying correct motor rotation during commissioning.
Details the procedure for altering the motor rotation direction.
Lists checks and functional tests required before starting operation.
States that pumps are designed for continuous operation (S1).
General safety precautions and procedures before performing maintenance.
Tips for maintaining pump reliability and seeking assistance for malfunctions.
Information on coolant specification and when to change it.
Recommends venting the volute back to the sump.
Instructions on how to drain the volute on AFC series pumps.
To Next Page
