Need help?Do you have a question about the Sulzer ABS AFC 1541 and is the answer not in the manual?
General| Model | Sulzer ABS AFC 1541 |
|---|---|
| Material | Cast Iron |
| Application | Wastewater, Sewage |
| Type | Submersible pump |
| Motor Type | Induction Motor |
Details on suitable liquids and regulations for sewage pumping applications.
Information on ATEX certified explosion-proof motor versions.
Specific guidelines for operating explosion-proof pumps in hazardous environments.
Key technical data including maximum noise level.
Details on interpreting pump nameplate data for ordering and queries.
Details on the DI probe for seal monitoring and activation alerts.
Information on PTC thermistor for motor overheat protection.
Details on optional bearing temperature monitoring with PTC thermistors.
Illustrative diagram showing pump installation components.
Guidelines for installing the discharge line per regulations, avoiding frost.
Procedure for verifying correct pump rotation direction during commissioning.
How to alter the pump's direction of rotation by qualified personnel.
Information on pump design for continuous operation (S1) and Ex pump usage.
Advice on pump reliability, troubleshooting malfunctions, and recommended inspections.
Specifications and quantities for coolant, and when to change it.
Recommended method for venting the pump volute.
How to drain the pump volute using the provided tapped hole.
To Next Page
