WARNING
Read all instructions and make sure the appearance of the device has no damage before you use it. Failure
to follow all instructions listed below may result in electric shock fire and/or serious injury.
1. Keep the working area nice and clean.
(1) Mess and dark areas may cause of accidents.
(2) Keep the device away from rain or moisture to decrease the risk of electric shock or short- circuiting
occurred.
2. Be alert to workplace safety
(1) Use the device under a well lit and clean environment.
(2) Keep children and other people away unless the person has been assigned for the task to avoid the danger
of injury.
(3) Do not play around while the tool is being used to avoid the danger of distractions.
(4) Do not work with the device in potentially explosive environments in which there are inflammable liquids,
gases or dusts. Electrical power tools create sparks, which can ignite dusts or fumes.
(5) Do not use the device if you are tired or under the influence of drugs, alcohol or medication.
3. When the devices are not being used, store them in a safe place.
4. Use a suitable device for the job will be safer at work and have a better result.
5. Always use a screwdriver that is intended for the task you are undertaking. Do not overload or use it improperly
such as drilling or tapping.
6. Dress properly. Do not wear loose clothing or jewels while operating the tool to avoid the danger of trapping.
7. By using the device correctly, make sure to hold it firmly with two hands in place before starting the trigger.
8. When using the electrical power tool, take into account the auxiliary handle or waist hook is advantage of
working conditions. On the contrary, the purposes of the waist hook or driver hook is convenient to put the device
away and easier to keep it out of reach of children.
9. Look after either the device or the battery carefully and have any damaged parts repaired by an authorized or
qualified shop. Always keep the tool nice and clean; pay attention on the machine grease which might ruin the
tool.
10. Disconnect the plug from the power source after the charger has been used.
11. Take apart the battery from the device when it is not being used.
12. Use only the accessories that are detailed in the operating instructions. The use of others which are not
recommended in the operating instructions may affect the functioning of the device. It could lead to an increased
risk of personal injury as well.
13. Remain alert at all times and watch what you are doing during proceeding. Before operation, always check every
part is in good condition and move freely in order to function properly.
14. This device only applies for metal screw bits designated with their dimensions and their shape. Do not
recommend to countersink or force of loading on any material such as plastic and wooden.
15. The device does not apply for elastic or tensile load with washer on.
To Next Page
Loading...