Colors and styles may vary.
Made in China
1/19
Summer Infant (USA), Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-401-671-6551
© 2019 Summer Infant (USA), Inc.
If the gate does not close properly:
1. Gate is not properly aligned in the door
frame.
Solution: Make sure the gate is properly
aligned in the door frame. To adjust the gate’s
alignment, loosen all four tension bolts and
reposition gate so that it matches the “correct”
image. Re-tighten tension nuts.
2. Pressure of tension bolts needs to be
adjusted.
Solution: Loosen or tighten the upper tension
nuts. Ensure the upper latch handle always
remains below the release button. Ensure the
upper latch handle engages securely when the
gate swings closed and that it can be released
properly when the release button is pushed.
troubleshooting
maintenance
• Regularly check tension bolts to make sure the gate is securely in place.
• Do not use the gate if any components are damaged or missing.
• Surface-clean with a damp cloth or sponge, using mild detergent and warm water.
• To order a replacement hardware kit, contact Consumer Relations and reference the item number below.
.
correct!
Make sure
upper latch
handle remains
below release
button!
incorrect!
We're here to help!
If you have any questions or need assistance,
contact our Consumer Relations Team at
1-401-671-6551 or www.summerinfant.com/contact
replacement hardware kit # 07060A-10
To Previous Page
Loading...