replacement parts:
Pressure Pads
Set of 4
27260-20
Wall Cups
Set of 4
27260-23
Adjustment Wheels
Set of 2
27260-22
• Check all hardware to ensure gate is securely in place before each use.
• Do not use gate if any of the components are damaged or missing.
• Wipe surface with a damp cloth or sponge, using mild detergent and warm water to clean. Towel dry.
troubleshooting:
maintenance:
IMPORTANT
Replacement parts may be ordered by calling
our Consumer Relations Team at
401-671-6551. Please reference the
appropriate part number listed to the right.
Extended the gate frame too far? Need to remove the gate entirely? First, use the previous steps in this instruction booklet to remove the
gate door, unlock foot petal, and remove gate frame from the opening. There is a release button located on the underside of the gate that will allow you
to slide the gate back to a smaller width.
press inward &
slide gate
frame to a
smaller width
locate release
button on
underside of
gate frame
locate release
button on
underside of
gate frame
2
nd
1
st
To close: Slide the door closed until the handle clicks into
the latch.
To open: Press the release buttons on both sides of
the door handle and pull back.
gate operation:
squeeze
and pull
back
press
and pull
back
11
To Next Page
Loading...
