To Next PageTo Next PageHow to troubleshoot a SummerAire TOP CONNECT SHRV 100T that is not working?
If your SummerAire Electric Heater isn't working, there might be a few reasons. First, ensure the heater is properly plugged into a powered outlet. Check the front access door safety switch. Unlatch the door and inspect the safety switch. If these steps don't solve the issue, it could be a defective component, and you should contact your installer.
What to do if SummerAire Electric Heater HRV status panel is flashing HIGH continuously?
If the HRV status panel on your SummerAire Electric Heater is flashing HIGH continuously, it could be due to several reasons. The internal or external dehumidistat might be set too low; adjust the dehumidistat RH setting or set point to a higher level. Also, check if a remote push button has been activated. If the issue persists, it may indicate a defective dehumidistat or PC board, in which case you should contact your installer.
Why is the SummerAire TOP CONNECT SHRV 100T Electric Heater's fan not running when the On/Off switch is illuminated?
If the On/Off switch on your SummerAire Electric Heater's HRV front panel lights up but the fan isn't running, the mode of operation might be set to “Auto Off.” Try selecting a different operation mode either on the HRV itself or via a remote device. If this doesn't solve the problem, there may be a defective component, and you should contact your installer.
General| Brand | SummerAire |
|---|---|
| Model | TOP CONNECT SHRV 100T |
| Category | Electric Heater |
| Language | English |
Provides guidance on operating the HRV during the heating season, including humidity control.
Guidance for operating the HRV during the air conditioning season, focusing on ventilation.
Explains the basic operation of the HRV for maximizing home comfort and ventilation.
Details the function of the main power switch for the HRV unit and its indicator light.
Explains how to select fan speeds and operational modes using the select button.
Describes the Auto/Off mode where the HRV operates based on internal or external controls.
Explains the indicator light for high-speed operation and how it functions.
Details the function of the summer/winter switch for core protection against damage.
Explains the meaning of the LED indicator lights on the HRV control panel.
Details the electronically controlled damper defrost cycle and its operation.
Explains how to set and use the internal dehumidistat for humidity control.
Instructions for connecting and operating the 20-Minute Remote Timer Touch Pad.
Explains the operation of Remote Timer Touch Pads for timed high-speed ventilation.
Details the installation and use of the Wall Mount Dehumidistat for humidity monitoring.
Describes the detachable Scout control for remote operation of the HRV unit.
Explains the functions and operation of the WATCHMAN intermediate remote control.
Details the features and operation of the SENTINEL deluxe remote control with LCD display.
Explains the function and material of the winter core for heat recovery and humidity reduction.
Describes the summer core's function in conditioning incoming air and managing moisture.
Explains how the safety door switch disables the unit when the access door is opened.
Details the operation and settings of the internal dehumidistat for indoor humidity control.
Describes the automatic operation of the damper door during defrost cycles and warnings.
Details tasks to perform every six months, including filter and core cleaning and condensate tray checks.
Detailed steps for cleaning the HRV fan blades, including preparation and reassembly.
Lists symptoms, causes, and solutions for control-related issues of the HRV.
Lists symptoms, causes, and solutions for operational problems of the HRV unit.
Covers the warranty period for the entire Heat Recovery Ventilator unit.
Outlines the lifetime warranty coverage for the HRV core component.
Details the five-year warranty period for electrical components of the HRV.
