Installation
10 / 29 EN
Refrgerator / User Manual
3.4. Connecting
the water hose to
the refrigerator
Connect the water line to a water
supply valve. If a valve is not present
or you are not sure, consult a qualified
plumber.
3.5. Connecting the
water line to the
water supply
hose (A).
2.Push the water hose downwards
firmly to slip it onto the water inlet
valve (C).
3.Tighten the union (C) by hand to
secure it onto the water inlet valve.
Normally, you are not required
to tighten the union with a tool.
However, you can use a wrench or
pliers to tighten the union if there is a
leakage.
To Next Page
Loading...
