5
Connect this appliance to a 3-prong power supply socket outlet (which has a ground
terminal).
Connection to Power Supply
If you only have a two-prong outlet, have it replaced by a qualified technician
with an outlet that meets the local codes
DO NOT USE AN EXTENSION CORD
.
Required nominal voltage and frequency are indicated on the rating plate. The
connection to the power supply and grounding has to be made according to current
standards and regulations.
The appliance resists temporary voltage fluctuations with a tolerance of -15 to 10%. On
model SBC490OS only, a GFCI (ground fault circuit interrupter) is built into every line
cord. In the event the cooler is not
operating, first check to see that the GFCI has not
tripped, then press the reset button.
To Next Page
Loading...
