What to do if my Summit SPWD2202W Washer/Dryer door cannot be opened?
If the door of your Summit Washer/Dryer cannot be opened, it might be due to the machine's safety protection design. Disconnect the power to resolve this.
Why won't my Summit SPWD2202W start?
Your Summit Washer/Dryer might not start because of several reasons: the door might not be closed tightly, the power plug might not be correctly inserted, the water supply tap might not be opened, the “On/Off” button might not be pressed, or the “Start/Pause” button might not be pressed. Check these to resolve the issue. Restart the appliance after ensuring the door is properly closed.
What to do if my Summit SPWD2202W Washer/Dryer is leaking water?
If you notice water leakage from your Summit Washer/Dryer, check and fasten the water pipes to ensure the connection between the inlet pipe or outlet hose and the tap or washing machine is tight. Also, inspect the drain pipe in the room for any blockages. If blocked, clean the outlet hose and, if necessary, consult a specialized person for repair.
What to do if water is overflowing from the bottom of my Summit SPWD2202W Washer/Dryer?
If water is overflowing from the bottom of your Summit Washer/Dryer, it could be due to a loose inlet pipe or a leaking outlet hose. Ensure the inlet pipe is firmly connected. If the outlet hose is leaking, replace it.
What to do if my Summit Washer/Dryer indicator or display does not light up?
If the indicator or display on your Summit Washer/Dryer doesn't light up, first check if the power is shut down and the power plug is correctly connected. If the issue persists, it may indicate problems with the PC board or a connection problem with the harness, in which case you should call the service line.
Why are washing effects not good with my Summit SPWD2202W Washer/Dryer?
If you're experiencing poor washing results with your Summit Washer/Dryer, it could be because the clothes are excessively dirty, requiring a more appropriate wash cycle. Alternatively, you might not be using enough detergent. Refer to the detergent package instructions and add the correct amount.
Why is there detergent residue in the dispenser of my Summit Washer/Dryer?
If you find detergent residues in the dispenser of your Summit Washer/Dryer, it's likely because the washing powder has become damp and clumped together. Clean and wipe the dispenser box. Consider switching to liquid detergents or detergents specifically designed for drum washers.
What to do if there is overtime water draining in my Summit SPWD2202W?
Check if the drain hose of your Summit Washer/Dryer is blocked.
Why is my Summit SPWD2202W having water injecting problems while washing?
If your Summit Washer/Dryer is experiencing water injecting problems while washing, check if the water pressure is too low. Also, make sure that the water pipe is straightened and that the inlet valve filter is not blocked.
What to do if my Summit Washer/Dryer has a heating fault?
If your Summit Washer/Dryer has a heating fault, it may be due to a damaged NTC or an aging heating pipe. You can still wash clothes normally, but without heating. Contact the service center promptly.
General| Brand | Summit |
|---|---|
| Model | SPWD2202W |
| Category | Washer/Dryer |
| Language | English |
General safety advice for installation, use, and care of the appliance.
Crucial guidelines to reduce fire, electric shock, or injury risks.
Requirements and importance of proper grounding for electrical safety.
Preparations and precautions before initial operation of the washer.
Guidelines on how to protect the washing machine from damage.
Specific warnings and advice for safe handling and moving of the machine.
Advice on what and how to wash, including detergent use and fabric care.
Essential conditions and steps for correct appliance installation.
List of required tools and included parts for installation.
Guidance on selecting an optimal and safe location for the washer.
Necessary space around the machine for proper installation and ventilation.
Specifications for power supply, wiring, and grounding connections.
Instructions for connecting the water inlet hose to the machine.
Different methods and requirements for draining water from the machine.
Step-by-step guide to ensure the washing machine is perfectly level.
Detailed instructions for connecting the power supply safely.
Steps to take before starting a wash cycle for optimal results.
Explanation of the buttons, displays, and functions on the control panel.
Description of each available wash program and its intended use.
Details on special functions like Time Save, Child Lock, Delay, and Add a garment.
Initial setup and first wash cycle instructions for the appliance.
Steps to begin operating the washing machine after setup.
Guidance on choosing the correct wash program based on load and dirtiness.
A comprehensive table detailing programs, loads, temps, and times.
General maintenance advice to prolong the appliance's lifespan.
Instructions for cleaning the inside of the washing drum.
Steps to take if the washing machine freezes in low temperatures.
Methods to prevent or deal with freezing in the inlet and drain pipes.
Procedures for cleaning the drain pump filter and removing obstructions.
How to open the door manually in case of power failure or malfunction.
Common problems, their causes, and suggested solutions.
Additional troubleshooting guidance for appliance issues and error codes.
Explanation of graphic symbols used on clothing care labels.
To Next Page
