1
3
54
2
Remove outer packaging and shrink wrap.
Cut the bottom cable straps securing the workstation to the pallet. Release the brakes behind
the wheels.
Connect the petrol probe to the end of
the petrol hose.
Roll the workstation off the pallet.
Forward is the easiest way holding the
keyboard tray for stability.
Remove all boxes from the workstation.
Check the boxes, you should have the
following items:
Box 1 (located on the rear of the cabinet)
Wireless laser A4 printer
Box 2 (located inside the cabinet)
Petrol exhaust
probe
Petrol hose
Diesel hose
Diesel exhaust probe
ROTI device
EOBD dongle
Temperature probe
Power cable
Air mouse
(Inc 2* AAA batteries)
Spare replacement filters
Leak check tool
Battery adaptor
Box 3 (located on the keyboard shelf)
• Smoke analyser
Documentation:
- Safety
precaution guide
- MOT diesel test
flow chart
- Consumables
and ROTI guide
- Smoke and gas
calibration
certificate
- GEA conformity
certificate
Note: When removing the workstation off the
pallet please do so with care.
To Next Page
Loading...