Sunbeam 9103-9294 - Natural Gas Conversion; Step 3 Replace Orifice; Step 4 Connect Natural Gas Hose; Step 5 Plug Natural Gas Fixture

bellows tightly, then connect and tighten the natural
painted with black mark.
4. Connect the natural gas hose with the gas valve
Requires a CSA Certified NG Conversion kit
50 000 BTU and 3/8” NG Hose.
by screwing clockwise tightly.
supply piping system.
Natural Gas
Conversion
natural gas supply
piping system
natural gas hose
gas valve
3
4
5
inlet tube
bellows
Page 10