To Next PageTo Next PageWhy won't my Sunbeam Outdoor Fireplace burner light?
Several factors can prevent your Sunbeam Outdoor Fireplace burner from lighting. The propane cylinder might be empty, so replace it. There may be a blockage that needs clearing. Ensure the control knob is in the ON position. Low gas pressure or outdoor temperatures below 40°F can also be culprits; use a full cylinder in cold weather. Avoid having the control knob fully on.
What to do if my Sunbeam Outdoor Fireplace produces thick black smoke?
If your Sunbeam Outdoor Fireplace is emitting thick black smoke, it is likely due to a blockage in the burner. Remove the blockage and thoroughly clean the burner, both inside and out.
Ensures safe outdoor operation, correct propane tank usage, dimensions, and handling procedures.
Guidelines for safe operation, including ignition, flame control, gas leak prevention, and avoiding hazards.
Specifies safe clearances from combustible materials and keeps the appliance area clear of hazards.
Safety measures regarding water exposure, component disconnection, cylinder storage, and vehicle operation.
Covers operational safety, maintenance, child supervision, temperature hazards, and professional servicing.
Highlights specific cautions like wet components and reiterates clearance requirements for safe operation.
Explains hazard symbols (Danger, Caution) and provides essential safety precautions for operation.
Information on natural gas conversion, stating it must be done by a professional.
Steps for setting up the fire pit, including checking parts, placing the gas tank, and distributing flame glass.
Details safe practices for using, storing, and handling propane cylinders, including regulations and requirements.
Instructions for installing the battery into the electronic igniter component.
Guides on connecting the gas tank and performing essential leak tests for safety.
Steps to safely disconnect the knob, gas valve nut, and thermocouple nut for conversion.
Instructions for removing the propane orifice from the inlet tube.
Instructions for removing the propane regulator, bellows, gas valve, and entire unit.
Steps for connecting the natural gas hose, orifice, bellows, and aligning the gas valve.
Completes the conversion by connecting the knob, thermocouple, applying the label, and performing a leak test.
Essential checks before operating the fire pit, including assembly, connections, and environmental conditions.
Steps to follow after operating the fire pit, including turning off gas and disconnecting the line.
Highlights critical warnings about wet components, high temperatures, and carbon monoxide hazards.
Ensures proper setup, surrounding area clearance, and gas connection checks before turning on the gas supply.
Detailed instructions for lighting the fire pit, adjusting flame levels, and relighting procedures.
Procedure for safely extinguishing the burner and turning off the gas supply.
Instructions for cleaning the exterior surfaces with warm soapy water and handling water damage.
Guidance on maintaining clear airflow, preventing blockages, and cleaning burner passages.
Procedures for storing the fire pit between uses and during periods of inactivity or transportation.
Identifies common problems like burner not lighting or low flame, and provides corrective actions.
Steps for covering the fire table with a lid and protective cover and storing it in a sheltered area.
Details the terms, conditions, limitations, and exclusions of the one-year limited warranty.
Information on how to request replacement parts and contact customer service for assistance.
Ensures safe outdoor operation, correct propane tank usage, dimensions, and handling procedures.
Guidelines for safe operation, including ignition, flame control, gas leak prevention, and avoiding hazards.
Specifies safe clearances from combustible materials and keeps the appliance area clear of hazards.
Safety measures regarding water exposure, component disconnection, cylinder storage, and vehicle operation.
Covers operational safety, maintenance, child supervision, temperature hazards, and professional servicing.
Highlights specific cautions like wet components and reiterates clearance requirements for safe operation.
Explains hazard symbols (Danger, Caution) and provides essential safety precautions for operation.
Information on natural gas conversion, stating it must be done by a professional.
Steps for setting up the fire pit, including checking parts, placing the gas tank, and distributing flame glass.
Details safe practices for using, storing, and handling propane cylinders, including regulations and requirements.
Instructions for installing the battery into the electronic igniter component.
Guides on connecting the gas tank and performing essential leak tests for safety.
Steps to safely disconnect the knob, gas valve nut, and thermocouple nut for conversion.
Instructions for removing the propane orifice from the inlet tube.
Instructions for removing the propane regulator, bellows, gas valve, and entire unit.
Steps for connecting the natural gas hose, orifice, bellows, and aligning the gas valve.
Completes the conversion by connecting the knob, thermocouple, applying the label, and performing a leak test.
Essential checks before operating the fire pit, including assembly, connections, and environmental conditions.
Steps to follow after operating the fire pit, including turning off gas and disconnecting the line.
Highlights critical warnings about wet components, high temperatures, and carbon monoxide hazards.
Ensures proper setup, surrounding area clearance, and gas connection checks before turning on the gas supply.
Detailed instructions for lighting the fire pit, adjusting flame levels, and relighting procedures.
Procedure for safely extinguishing the burner and turning off the gas supply.
Instructions for cleaning the exterior surfaces with warm soapy water and handling water damage.
Guidance on maintaining clear airflow, preventing blockages, and cleaning burner passages.
Procedures for storing the fire pit between uses and during periods of inactivity or transportation.
Identifies common problems like burner not lighting or low flame, and provides corrective actions.
Steps for covering the fire table with a lid and protective cover and storing it in a sheltered area.
Details the terms, conditions, limitations, and exclusions of the one-year limited warranty.
Information on how to request replacement parts and contact customer service for assistance.
General| Brand | Sunbeam |
|---|---|
| Model | Contempo Fire Table |
| Category | Outdoor Fireplace |
| Language | English |
