Sunbeam 9103-9294 User Manual

DANGER
Owner’s Manual
Aluminum Fire Table
DANGER
If you smell gas:
1. Shut off gas to the appliance.
3. If odor continues, keep
away from the appliance and
immediately call your gas
WARNING
Do not store or use gasoline
liquids in the vicinity of this or
any other appliance.
An LP-cylinder not connected
for use shall not be stored in
the vicinity of this or any other
appliance.
WARNING
For outdoor use only.
WARNING
Improper installation, adjustment, alteration, service or maintenance can cause injury or
property damage. Read the owner’s manual thoroughly before installing or servicing this
result causing property damage, personal injury or loss of life.
CARBON MONOXIDE HAZARD
This appliance can produce carbon monoxide
which has no odor.
Using it in an enclosed space can kill you.
Never use this appliance in an enclosed space
such as a camper, tent, car or home.
CAUTION
Firebowl Pan and Flame Glass are wet!
Items #
9103-9294

Sunbeam 9103-9294 Specifications

General

Brand	Sunbeam
Model	9103-9294
Category	Outdoor Fireplace
Language	English

Summary

Safety Information

Package Contents

Hardware Contents

Assembly

Step 1 Assembly

Assemble front and back panels with side panels using bolts.

Step 2 Assembly

Connect side panels and back panel with cross bar using bolts.

Step 3 Assembly

Attach front panel to side and back panels using bolts.

Step 4 Assembly

Attach front panel to side and back panels with cross bar using bolts.

Assembly

Step 5 Assembly

Attach door to side panels using bolts.

Step 6 Assembly

Attach side panels to back panel using bolts and washers.

Step 7 Assembly

Place tabletop on base, secure cylinder, close door.

Natural Gas Conversion

Step 1 Disconnect Propane Hose

Disconnect the propane hose from the gas valve.

Step 2 Disconnect Propane Orifice

Unscrew and disconnect the propane orifice from the bellows.

Natural Gas Conversion

Step 3 Replace Orifice

Replace propane orifice with natural gas orifice and tighten.

Step 4 Connect Natural Gas Hose

Connect the natural gas hose with the gas valve by screwing clockwise.

Step 5 Plug Natural Gas Fixture

Plug the natural gas fixture into the natural gas supply piping system.

Natural Gas Conversion

Step 6 Retain Rating Label

Retain the rating label for your records.

Step 7 Perform Natural Gas Leak Test

Apply leak test solution to connections and check for bubbles.

Assembly

Step 8 Pour Flame Glass and Place Lid

Pour flame glass around burner and place lid in place.

Step 10 Store Lid

Lid can be stored on hooks as indicated when fire pit is in use.

Step 11 Install Battery to Igniter

Install battery into igniter, ensuring correct polarity.

Assembly

Step 12 Connect Gas Tank

Connect hose and regulator to cylinder, tighten valve and regulator.

Assembly

Step 13 Install and Secure Cylinder

Place cylinder in bottom plate, secure it, and close the door.

Assembly

Step 14 Perform Leak Test

Apply leak test solution to hose/regulator and regulator/cylinder connections.

Operation

Care & Maintenance

Keep Exterior Surfaces Clean

Instructions for cleaning the exterior surfaces of the fire table.

Storage

Guidance on storing the fire table between uses and during periods of inactivity.

Service

Information regarding professional repair of gas passages and components.

Troubleshooting

Common problems with possible causes and corrective actions.

Storage

Fire Table with Lid and Cover

Diagram showing the fire table covered with lid and protective cover.

Cover Fire Table

Cover fire table with lid and protective cover to prevent water accumulation.

Store Fire Table

Store fire table in an area sheltered from inclement weather.

Limited Warranty

Conditions and Limitations

Details the conditions and limitations of the product warranty.

Replacement Parts

Information on how to request replacement parts for lost or damaged items.