Sunbeam Contempo Fire Table - Natural Gas Conversion: Regulator Removal; Removing Propane Regulator Assembly

bellows
propane
regulator
propane
regulator
gas valve
gas valve
bellows
propane orice
4. Unscrew and disconnect the bellows from propane
orice counterclockwise using the wrench, then
disconnect the propane orice from the inlet tube.
Propane orice (2.21 mm diameter size) is identied
with a red mark.
5. Remove the entire unit (gas valve, bellows and
propane regulator included) from re pit.
6. Unscrew and disconnect propane regulator from gas
valve counterclockwise using the torque wrench.
Natural Gas
Conversion
4
1-877-387-3639 | Page 9
5
6
Hardware Used
Wrench
Hardware Used
Torque Wrench