screwing clockwise tightly using the wrench.
10
9
Natural Gas
Conversion
10. Align the gas valve with control panel through the
hole using the wrench, connect the nut clockwise
tightly.
Hardware Used
Wrench
Hardware Used
Wrench
natural gas
bellows
nut
gas valve
natural gas
inlet tube
tube using the wrench.
with a black mark.
8
Hardware Used
Wrench
natural gas
hose
gas valve
7. Connect the natural gas hose with gas valve by
screwing clockwise tightly using the torque wrench.
Requires a CSA Certified NG Conversion kit
50 000 BTU and 3/8” NG Hose.
7
Hardware Used
Torque Wrench
Page 10
To Next Page
Loading...