EasyManua.ls Logo

Sunbeam HE4100 - Troubleshooting Common Issues; Heater Care and Cleaning

Sunbeam HE4100
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Care and Cleaning
Ensure that the heater is switched off and
disconnected from the power outlet before
cleaning.

a soft damp cloth and dry thoroughly with a
dry cloth.


damp cloth, or by carefully going across the
grille with a vacuum cleaner or hand held
vacuum.

clean your heater, as these will damage the
surface.
When not in use store the heater in a cool
dry place.
Troubleshooting Guide
1. If your heater fails to operate, check the
following:
 
breaker is working..
- Check for obstructions, if obstructions are
present, the heater may have gone over
temperature. If this is the case turn off
the heater at the power outlet, remove the
obstructions and wait for the heater to cool
before turning the heater back on.
- Check that the thermostat is not set too low.



Related product manuals