To Next PageTo Next PageWhat to do if the cord or any wiring is damaged on Sunbeam Sleep Perfect BL51 Accessories?
Do not attempt to repair it yourself. Contact the Sunbeam Customer service line on 1300 881 861 in Australia or 0800 786 232 in New Zealand.
What to do if Sunbeam Sleep Perfect BL51 electric blanket is not heating?
If your Sunbeam Accessories electric blanket isn't heating, here are a few things to check: 1. Make sure the control is securely plugged into the blanket and that it clicks into place. If the timer indicator light flashes after reconnecting, the control connector plug isn't properly fitted. 2. Verify the power cord is connected to the outlet and the power is switched on. 3. If you're using the 9 heat control, ensure the slide switch is in the 75-minute or 12-hour position. 4. Check if there's an On/Off switch on the back of the control and ensure it's in the 'On' position. 5. For double, queen, king, and super king blankets, ensure both controls are plugged into the blanket and the cords are plugged into a power outlet. 6. If you're using a powerboard, make sure it has a safety cut ...
Detachable controls and waterproof element allow machine washing.
Offers 9 heat settings and a timer for 75 minutes or 12 hours.
Instructions for connecting, turning on, selecting temperature and timer.
Checks for connection, power, slide switch, and controller issues.
Contact customer service for repair; do not attempt yourself.
Diagnosing flashing standby light for connection or overheating faults.
Product covered by 3-year warranty, in addition to consumer rights.
Requires proof of purchase; free repair/replacement for defects.
Does not cover misuse, accidental damage, or commercial use.
Detachable controls and waterproof element allow machine washing.
Offers 9 heat settings and a timer for 75 minutes or 12 hours.
Instructions for connecting, turning on, selecting temperature and timer.
Checks for connection, power, slide switch, and controller issues.
Contact customer service for repair; do not attempt yourself.
Diagnosing flashing standby light for connection or overheating faults.
Product covered by 3-year warranty, in addition to consumer rights.
Requires proof of purchase; free repair/replacement for defects.
Does not cover misuse, accidental damage, or commercial use.
General| Brand | Sunbeam |
|---|---|
| Model | Sleep Perfect BL51 |
| Category | Accessories |
| Language | English |
