Suncast BMS7775 - Page 43

For lower roof connectors, install on screw (AA) into
truss in front of roof connectors. For middle and
upper roof connectors, install one screw (AA) into
truss behind roof connectors. Repeat for remaining
three roof connectors.
For clarity, illustration is shown with right front panel
and right door removed.
From the interior of the shed, attach two screws (AA)
through the holes in each right roof panel (M) into
each left roof panel (L) to secure roof assembly.
For clarity, illustration is shown with left front panel
left door, and front header removed.
43