Suncast BMS8100 - Page 28

Secure each metal hinge plate with one screw ( KK) and
one nut ( LL).
Repeat Steps 41-43 for left door ( L).
Insert two screws ( CCC), into left latch plate ( TT), and
through pre- drilled holes in doors. While holding plate in
place on exterior door, secure with two washers ( III) and
two locking nuts ( GGG). Repeat for right latch plate ( FFF).
From the outside of doors, insert door handles ( SS)
onto the handle plates ( UU). On inside of the doors,
place washers ( HHH) on center door handle locations,
and secure each handle ( SS) with one long screw ( KKK).
Secure handle plates ( UU) with four washers ( HHH) and
four screws ( JJJ).
28