19
Align tabs on bottom of side panel (F) with slots along
oor (A). Lower panel into slots and lock in place by
sliding panel toward front corner.
Note: Use a rubber mallet to “push” side
panel (F) into locked position.
Shed Assembly/Walls (continued)
Secure side panel (F) with four easy bolts (NN), working
from oor to roof. DO NOT use torque wrench. Use easy
bolt easy driver (OO) and hand tighten. Easy bolt head
will be ush when fully seated. DO NOT over tighten
easy bolts.
Note: You may hear a click when easy bolt has been
tightened completely.
To Next Page
Loading...
