EasyManua.ls Logo

Suncast DB9750 User Manual

Suncast DB9750
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER’S MANUAL
GUIDE DE MONTAGE
MANUAL DEL USUARIO
No Tools Required
Aucun outil n’est nécessaire pour le montage
No Necesita Herramienta para el armado
© 2011 Suncast Corporation, Batavia, IL
DB9750 / DBH9750
Ultra-Large Storage Bench
Coffre géant à siège
Escaño con Gran Espacio de Almacenamiento
Assembly Instructions / Instructions de montage / Instrucciones de Armado
0360973E
2. Place tabs of Side Panel B into corresponding holes on Back
Panel A and apply pressure to snap into place.
2. Placez les languettes du Panneau latéral B dans les trous
correspondants du Panneau arrière A et appuyez afin que les pièces
s’encastrent d’un bruit sec.
2. Coloque las lengüetas del Panel Lateral B en las ranuras
correspondientes en el Panel de Atrás A y presione el Panel B para
que las lengüetas encajen en su lugar.
1. Place Back Panel A on flat surface ribbed side up.
1. Placez le Panneau arrière A sur une surface plate avec le côté
rainuré vers le haut.
1. Coloque el Panel de Atrás A sobre una superficie plana con las
costillas hacia arriba.
A
B
A
WARNING
• Not intended for storage of flammable or caustic chemicals.
• Exercise caution when storing chemicals.
• Not intended for usage by children.
• This is not a toy box.
• To avoid risk of suffocation, do not allow children to play inside container.
• This product may become susceptible to impact damage in freezing temperatures.
• Do not store near excessive heat.
• Exercise caution when moving fully loaded product. This product is not intended for transporting
heavy objects. Use as a stationary storage device only.
Do not stand on lid.
ATTENTION
Ce produit n’est pas conçu pour l’entreposage de produits inflammables ou caustiques.
Prendre les précautions nécessaires pour l’entreposage de produits chimiques.
Ce produit n’est pas conçu pour être utilisé par des enfants.
Ce coffre n’est pas un jouet.
Ne pas laisser les enfants jouer à l’intérieur du coffre. Risques de suffocation.
Ce produit peut être endommagé par le gel.
Ne pas remiser près d’une source de chaleur excessive.
Déplacer le coffre rempli a vec précaution. Ce produit n’est pas conçu pour la transport des objets
lourds. Recommandé pour être utilisé sur place seulement.
Ne pas se tenir debout sur le couvercle.
ADVERTENCIA
No está diseñada para guardar productos inflamables o substancias químicas cáusticas.
Tenga cuidado cuando almacene substancias químicas
No ha sido diseñada para ser usada por los niños.
No es una caja juguetes.
Para evitar el riesgo de asfixia, no permita que los niños jueguen dentro de la caja.
Este producto puede sufrir daños por impacto en temperaturas de congelación.
No guarde la caja cerca de fuentes de calor excesivo
Tenga cuidado al mover la caja completamente llena. Este producto no ha sido diseñado para transporte
de objetos pesados. Uselo únicamente como una unidad de almacenamiento estacionario.
No se pare sobre la tapa.
Question and Answer IconNeed help?

Do you have a question about the Suncast DB9750 and is the answer not in the manual?

Suncast DB9750 Specifications

General IconGeneral
BrandSuncast
ModelDB9750
CategoryIndoor Furnishing
LanguageEnglish

Summary

Product Safety Information

English Safety Warnings

Critical safety advice for chemical storage, child safety, and product limitations.

French Safety Precautions

Safety guidelines in French concerning chemicals, children, and environmental factors.

Spanish Safety Precautions

Safety guidelines in Spanish regarding chemical handling, child safety, and environmental conditions.

Assembly Instructions

Assemble Back Panel A

Place Back Panel A on a flat surface with the ribbed side facing up.

Attach Side Panel B to Back Panel

Insert tabs of Side Panel B into holes on Back Panel A and snap into place.

Attach Side Panel C to Back Panel

Insert tabs of Side Panel C into holes on Back Panel A and snap into place.

Attach Side Panels B and C to Front Panel

Insert tabs of Side Panels B and C into holes on Front Panel D and snap into place.

Attach Assembled Body to Base Panel

Place assembled deck box body onto Base Panel F, aligning tabs with holes, then push down to engage.

Install Lid

Insert lid posts into corresponding hinges in the back panel and slide lid down to close.

Secure Straps

Thread unattached end of strap through lid hole and pull forward to snap in place.

Insert Tray

Place the provided tray inside the assembled deck box.

Parts Identification

Component List and Part Numbers

Lists all parts with index numbers, names, and corresponding part numbers for DB9750 and DBH9750 models.

Related product manuals