Read instructions prior to assembly. This kit contains parts that can be damaged if incorrectly assembled. Please follow instructions. Suncast is not
responsible for replacing parts lost or damaged due to incorrect assembly.
© 2003 Suncast Corporation, Batavia, IL
0360865
GS8500
Slide-Top Storage Shed
OWNER'S MANUAL
Tools Required: screwdriver, small mallet
CAUTION
• Not intended for storage of flammable or caustic chemicals.
• Store heavy items near the bottom of stied.
• Not intended for use by children.
• Do not stand, sit, or store items on storage shed roof.
• Handle carefully in extreme temperatures.
• Repair or replace broken parts immediately.
• Suncast is not responsible for damage caused by weather or misuse.
• At regular intervals inspect your shed to make sure that assembly integrity has been maintained.
• Periodically check that the location you have chosen to set your stied is still level.
• Hea,, wet snow should be removed from roof panels.
• Doors should be kept shut and latched when not in use.
• Do not assemble stied during high winds.
• Keep roof slide tracks clean of leaves and debris.
Before you begin...
Consult your local authorities for any permits required to construct shed.
Small Part Recognition
Hinge Cap L
Hinge Cap A
Hinge Cap G
Back Floor Post D
Roof Connector U
Front Cap Plug E
Panel Connector C
Door Hinge Retainer K Door Latch Pin Housing M
Door Latch Pin N
Roof Connector F
Back Connector T
To Next Page
Need help?
General