Sundown Audio SALT-500.4 - User Manual

OWNER’S MANUAL
Mono Blocks:
SALT - 4
SALT - 6
SALT - 8
SALT - 12
Multi - Channels:
SALT - 200.2
SALT - 400.2
SALT - 200.4
SALT - 300.4
SALT - 500.4
HIGH PERFORMANCE CAR AMPLIFIER

Summary

Digital Monoblock Features

Digital Monoblock Specifications

Full Range Digital Features

Full Range Digital Specifications

Power Connections

Digital Monoblock Input Connection

Digital Monoblock Speaker Connections

Dual Amp Input Connection (Master & Slave)

Dual Amp Connection (Master & Slave)

Full Range Digital 2 CH Input Connection

Full Range Digital 2 CH Speaker Connection

Full Range Digital 4 CH Input Connection

Full Range Digital 4 CH Speaker Connection

Trouble Shooting

Amplifier Doesnt Turn On or No Output

Troubleshoot issues where the amplifier fails to power on or produce sound.

Amplifier Goes Into Protection

Diagnose reasons for the amplifier's protection circuit activation.

Distorted;Attenuated; Noise Sound

Identify causes of distorted, reduced, or noisy audio output.

Sundown Audio SALT-500.4 Specifications

General

Channels	4
RMS Power @ 4 Ohms	125W x 4
Frequency Response	10Hz - 30kHz
Signal to Noise Ratio	>90dB
Damping Factor	>200
THD @ 4 Ohm	<0.1%
Fuse Rating	60A
Operating Voltage	9V - 16V
Low Pass Crossover Frequency	50 Hz - 500 Hz
High Pass Crossover Frequency	50 Hz - 500 Hz
Bass Boost	0 - 12dB @ 45Hz
Input Sensitivity	0.2V - 6V