Sundown Audio SALT-8 User Manual

OWNER’S MANUAL
Mono Blocks:
SALT - 4
SALT - 6
SALT - 8
SALT - 12
Multi - Channels:
SALT - 200.2
SALT - 400.2
SALT - 200.4
SALT - 300.4
SALT - 500.4
HIGH PERFORMANCE CAR AMPLIFIER

Sundown Audio SALT-8 Specifications

General

Model	SALT-8
RMS Power at 1 Ohm	8000W
Frequency Response	10Hz - 250Hz
Input Sensitivity	6V - 0.2V
Low Pass Filter	35Hz - 250Hz
Subsonic Filter	10Hz - 50Hz
Bass Boost	0-12dB
Amplifier Type	Monoblock Class D

Summary

Digital Monoblock Features

Digital Monoblock Specifications

Full Range Digital Features

Full Range Digital Specifications

Power Connections

+12V Battery Connection

Connecting the main positive power wire from the vehicle's battery terminal to the amplifier.

Ground Connection

Establishing a secure chassis ground connection for the amplifier to ensure proper operation.

Remote Turn-On Connection

Connecting the remote turn-on wire to control amplifier power status from the source unit.

Digital Monoblock Input Connection

Digital Monoblock Speaker Connections

Dual Amp Input Connection (Master & Slave)

Full Range Digital 2CH Input Connection

Full Range Digital 2CH Speaker Connection

Full Range Digital 4CH Input Connection

Full Range Digital 4CH Speaker Connection

Trouble Shooting

Amplifier Doesn't Turn On or No Output

Diagnose issues related to the amplifier failing to power on or produce sound.

Amplifier Goes Into Protection

Identify causes for the amplifier's protection mode activation and how to resolve them.

Distorted/Attenuated / Noise Sound

Troubleshoot audio output problems like distortion, low volume, or unwanted noise.