To Next PageTo Next Page
Need help?Do you have a question about the Sunex HD SX5210 and is the answer not in the manual?
General| Category | Grinder |
|---|---|
| Air Consumption | 4 CFM |
| Air Inlet | 1/4" NPT |
| Collet Size | 1/4" |
| Hose Size | 3/8" |
| Weight | 1.2 lbs |
Read manual, wear PPE, and follow precautions to reduce injury risk from tool operation.
Specific safety advice on tool modification, environmental hazards, and operator suitability.
Guidelines for optimal air pressure, hose size, and fittings for the die grinder.
Daily procedure for lubricating the air tool using specific air motor oil.
Manufacturer's statement of compliance with EU directives and applied standards.
Declared noise levels (87 dBA) and vibration levels (<2.5 m/s²) as per standards.
Key technical data including collet size, speed, motor, dimensions, weight, and air consumption.
Illustrated diagram and table listing all parts with their reference numbers.
List of authorized service centers for repair and maintenance of Sunex HD® air tools.
Details of the two-year warranty covering defects in workmanship and materials.
