Sunex Tools 6602ASJ - Hydraulic Maintenance Guide; Regular Maintenance

6602ASJ/6603ASJ 6 Rev. 1/14/20
IMPORTANT: Service jacks are designed for lifting purposes only; always support raised load with jack stands.
REGULAR MAINTENANCE
• MONTHLY or as necessary (depending on usage)
1. Using a grease gun, add grease to grease fitting in the lift arm pivot shaft.
(Use a multi-purpose NLGI type grease only.)
2. Lubricate all linkages and pivot points.
(Use white lithium spray grease only.)
3. Remove handle; lubricate handle receptacle and handle end.
(Use white lithium spray grease only.)
4. Lubricate both rear casters, bearing and both front wheels.
(Use white lithium spray grease only.)
5. Tighten all accessible hardware.
#3
#4
#4
#1
#2
#2
#3
#2
#4
#2
#2#2 #2
HYDRAULIC MAINTENANCE GUIDE
MODEL 6602ASJ / 6603ASJ
CAPACITY: 2 AND 3 TON
ALUMINUM SERVICE JACK