EasyManua.ls Logo

Sunex Tools 6809A User Manual

Default Icon
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
6809A and 6810A 1 rev. 12/05/18
MODELS 6809 (Rev. C) and 6810 (Rev. B)
CAPACITY: 1,500 LBS.
UNDER HOIST SUPPORT STANDS
WARNING INFORMATION
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING
BEFORE USING THESE STANDS, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING
PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.
It is the responsibility of the owner to make sure all personnel read this manual prior to using these stands. It is also the responsibility of
the stand owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or
not legible, contact Sunex for replacements. If the operator is not fluent in English, the product and safety instructions shall be read to
and discussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator
comprehends its contents.
THE NATURE OF HAZARDOUS SITUATIONS
The use of portable automotive lifting and support devices is subject to certain hazards that cannot be prevented by mechanical means,
but only by the exercise of intelligence, care, and common sense. It is therefore essential to have owners and personnel involved in the
use and operation of the equipment who are careful, competent, trained, and qualified in the safe operation of the equipment and its
proper use. Examples of hazards are dropping, tipping or slipping of loads caused primarily by improperly secured loads, overloading,
off-centered loads, use on other than hard level surfaces, and using equipment for a purpose for which it was not designed.
METHODS TO AVOID HAZARDOUS SITUATIONS
Read, study, understand and follow all instructions before using.
User and bystanders must wear eye protection that meets ANSI Z87.1 and OSHA standards.
This stand is intended to assist in supporting under vehicle components, not the vehicle.
Inspect the stand before each use. Do not use if damaged, altered, modified, in poor condition, or has loose or missing hardware or
components. Take corrective action before using the stand.
Center load on saddle. Do not use ends of saddle to support load.
Adequately support the vehicle before starting repairs.
Be sure vehicle, vehicle component and stand are stable before performing any work.
Do not use beyond rated capacity. Do not shock load.
Do not use (or modify) this product for any other purpose than that for which it was designed without consulting the manufacturer's
authorized representative.
Use only on a hard level surface capable of supporting the load.
Failure to heed these warnings may result in fatal personal injury and/or property damage.
CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS
Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS,
MAINTENANCE INSTRUCTIONS and comply with them, and failure to comply with the METHODS TO AVOID HAZARDOUS SITUATIONS
could cause accidents resulting in serious or fatal personal injury and/or property damage.
WARNING: Indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
WARNING
WARNING
WARNING
WARNING
6809A and 6810A
CAPACITY: 1,500 LBS.
UNDER HOIST SUPPORT STANDS
WARNING: This product can expose you to chemicals including nickel which is known to the State of California to cause cancer and birth defects
or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Question and Answer IconNeed help?

Do you have a question about the Sunex Tools 6809A and is the answer not in the manual?

Sunex Tools 6809A Specifications

General IconGeneral
BrandSunex Tools
Model6809A
CategoryRacks & Stands
LanguageEnglish

Summary

Safety Warnings and Precautions

Important Instructions Before Operation

Read this manual completely and thoroughly before using the stands to understand operating procedures, safety warnings, and maintenance.

Nature of Hazardous Situations

Highlights hazards associated with portable automotive lifting devices, emphasizing intelligence, care, and common sense for safe operation.

Methods to Avoid Hazardous Situations

Provides essential methods to prevent accidents, including reading instructions, wearing eye protection, inspecting stands, and proper load centering.

Consequences of Not Avoiding Hazardous Situations

Details potential severe outcomes, such as fatal personal injury or property damage, resulting from failure to follow safety guidelines.

Product Setup and Operation

Setup Instructions

Step-by-step guide for assembling the support stands, identifying parts using the exploded view drawing in the manual.

Operating Instructions

Guidance on how to properly position and use the support stands under vehicle components for safe lifting and support.

Preventative Maintenance

Instructions for maintaining the stands, including proper storage, lubrication, cleaning, and pre-use inspections to ensure safety.

Parts Identification

6809A Parts List and Drawing

Detailed list and visual representation of all components for the 6809A model support stand, including part numbers and quantities.

6810A Parts List and Drawing

Detailed list and visual representation of all components for the 6810A model support stand, including part numbers and quantities.

Limited Warranty Information

Warranty Coverage

Details Sunex Tools' warranty against defects in workmanship and materials for one year from the date of purchase.

Warranty Exclusions

Specifies what is not covered by the warranty, such as damage from alteration, abuse, misuse, or unauthorized repairs.

Contact and Legal Rights

Provides contact information for warranty service and explains customer legal rights, noting variations by state.