Sunex Tools SX235KTB User Manual

SX235KTB 1 Rev. 05/02/02
Operating Instructions • Warning Information • Parts Breakdown
SX235KTB
SHORT
AIR HAMMER
SPECIFICATIONS
Blows Per Minute ..................4,500
Bore ..................................11/16"
Stroke ................................1-5/8"
Air Inlet............................1/4 NPT
Hose Size ........................3/8" I.D.
Air Pressure ........................90 PSI
Air Consumption..................4 CFM
Sound Level......................105 dBA
Length ................................5-1/2"
Shipping Wt.................3-9/16 lbs.
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.

Sunex Tools SX235KTB Specifications

General

Model	SX235KTB
Type	Pneumatic
Number of Pieces	1
Drive Size	1/2 inch
Material	Steel
Finish	Chrome
Case Included	Yes
Air Inlet	1/4 in NPT
Min Hose Size	3/8 in

Summary

Chemical Exposure Warning

Product Specifications

Safety Precautions

Safe Operation and Maintenance

Guidelines for safe operation, inspection, maintenance, and air supply parameters.

Personal Protective Equipment (PPE)

Mandatory use of safety goggles and hearing protection during operation.

Ergonomics and Vibration Awareness

Awareness of vibration effects and maintaining a balanced working stance.

Tool Handling and Accessory Safety

Proper handling of the tool, avoiding hazards from loose clothing and ensuring accessory security.

Parts Identification

Exploded View Diagram

Illustrates the assembly and individual components of the air hammer with reference numbers.

Operating Instructions

Air Supply Requirements

Details on recommended air pressure, hose diameter, and air quality for optimal tool performance.

Lubrication Procedure

Instructions for daily lubrication and precautions regarding oil discharge from the exhaust.

Tool Operation

Steps for using the tool, including chisel insertion, throttle control, and speed regulation.

Limited Warranty Information

Warranty Coverage and Limitations

Details on the one-year warranty, exclusions, and liability for damages.

Warranty Service and Contact

Procedure for returning equipment and contact information for warranty inquiries.