Sunex Tools SX246 User Manual

SX246 Rev. A: Parts Breakdown & Operating Manual Rev. 9/27/16
© Copyright 2016, Sunex Tools
®
Operating Instructions • Warning Information • Parts Break down
SX246 Rev. A
PISTOL GRIP NEEDLE SCALER
Blows per Minute .....................4,500 BPM
Number of Needles ................................ 19
Needle Diameter ................................. 3mm
Average Air Consumption ............. 10 CFM
Air Inlet .........................................1/4" NPT
Air Supply Hose Size .................... 3/8" I.D.
Rec. Air Pressure ............. 90 psig (6.2 bar)
Overall Length ...................................... 11"
Weight .............................................3.17 lb.
Sound Level ....................................98 dBA
SPECIFICATIONS
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
WARNING
RATED RPM OF ACCESSORY USED
MUST EXCEED THE MAXIMUM TOOL
RPM SHOWN
READ THIS MANUAL BEFORE
OPERATING TOOL
ALWAYS WEAR EYE PROTECTION
(USERS AND BYSTANDERS) WHEN
OPERATING OR PERFORMING
MAINTENANCE ON THIS TOOL
ALWAYS WEAR HEARING
PROTECTION WHEN OPERATING
THIS TOOL
ALWAYS WEAR BREATHING
APPARATUS WHEN OPERATING
THIS TOOL
AVOID PROLONGED EXPOSURE
TO VIBRATION
WARNING
RPMRPMRPM

Sunex Tools SX246 Specifications

General

Brand	Sunex Tools
Model	SX246
Category	Media Converter
Language	English

Summary

Product Specifications

Specifications Details

Key operational and physical characteristics including blows per minute, needle diameter, air consumption, and weight.

Safety Warnings and Precautions

General Operating Safety Guidelines

Mandatory safety measures including eye, hearing, and breathing protection, and vibration avoidance.

Comprehensive Safety Instructions

Detailed warnings on tool operation, maintenance, accessory use, and potential hazards like pressure, vibration, and chemicals.

Parts Breakdown

Component Identification

Illustrated diagram of the needle scaler with a numbered list of all parts and their corresponding part numbers.

Operation and Maintenance

Air Supply Requirements

Guidelines for proper air pressure, hose size, and maintaining clean, dry air for optimal tool performance.

Operating Procedures

Instructions on how to use the needle scaler for material removal and advice on applying moderate hand pressure.

Lubrication and Maintenance

Daily lubrication requirements for the air motor and safety precautions for oil discharge.

Troubleshooting Common Issues

Guidance on diagnosing and correcting power loss or erratic action due to air supply issues or internal grit.

Warranty Information

Limited Warranty Details

Information on the one-year warranty, coverage, exclusions, and how to obtain service or replacement parts.