Sunex Tools SX545B User Manual

SX545B 1 Rev. 02/01/05
Operating Instructions • Warning Information • Parts Breakdown
SX545B
3/8" DR.
H.D. R
EV.
R
IGHT ANGLE
AIR DRILL
SPECIFICATIONS
Free Speed .......................1,600 RPM
Maximum Capacity ....................
3/8"
Air Inlet ..............................1/4" NPT
Hose Size ..............................3/8" ID
Air Pressure .............................90 PSI
Air Consumption ..................... 4 CFM
Sound Level ........................... 94 dBA
Length ...........................................8"
Shipping Wt. .....................2-3/4 Lbs.
Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work with
approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION

Sunex Tools SX545B Specifications

General

Brand	Sunex Tools
Model	SX545B
Category	Drill
Language	English

Summary

Warning Information and Safety Guidelines

Health Risks from Dust Exposure

Details chemicals in dust causing cancer, birth defects, or reproductive harm.

Safety Guidelines for Operation

Lists essential safety measures including reading manuals, eye/hearing protection, and vibration awareness.

Product Specifications

Detailed Safety Warnings and Precautions

Operational Safety Standards

Adherence to ANSI standards, proper air pressure, and tool maintenance for safe operation.

Personal Protective Equipment

Mandatory use of eye, face, and hearing protection to prevent injury and hearing loss.

Handling Pressurized Air and Hoses

Precautions for air pressure safety, hose integrity, and avoiding accidental air discharge.

Vibration and Ergonomic Hazards

Awareness of vibration risks and the importance of proper body posture and breaks.

Rotating Parts and Clothing Hazards

Keeping clear of rotating ends, avoiding loose clothing, jewelry, and securing hair.

Drill Bit and Tool Usage

Guidelines for drill bit binding, pressure application, lubrication, and avoiding forcing the tool.

Parts Breakdown Diagram

Air Supply and Lubrication

Air Supply Requirements

Recommended air pressure, hose diameter, and air quality for optimal tool performance.

Proper Lubrication Procedure

Daily lubrication of the air motor using quality air tool oil to ensure longevity.

Operation Instructions

Starting and Using the Drill

Steps for centering, drilling, applying pressure, and handling bit penetration.

Emergency Procedures

Actions to take if the drill jams or if bits need to be removed.

Limited Warranty Information