Sunex Tools SX556-6 User Manual

SX556-2 / SX556-6 03/13/14
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
 
 
 
The risk of exposure to these types of chemicals varies depending on how
frequently you work with certain chemicals. To reduce your exposure to these

equipment, such as dust masks that are specifically designed to filter out
microscopic particles.
WARNING
WARNING
 
 
 
SX556-2
1" DrIVE Impact WrEnch
WIth 2" anVIl
SX556-6
1" DrIVE Impact WrEnch
WIth EXtEnDED 6" anVIl
Operating Instructions • Warning Information • Parts Break down
© Copyright 2014, Sunex Tools
®
SPECIFICATIONS
Square Drive Size ......................................1" (25.4mm)
Max. Torque ..........................1,600 Ft.-Lbs. (2,169 Nm)
Working Torque ....... 100-1,200 Ft.-Lbs. (136-1627 Nm)
Free Speed .................................................. 4,000 RPM
Avg. Air. Cons. .................................. 10 cfm (283 l/min)
Air Inlet ........................................................... 1/2" NPT
Min. Hose Size ................................. 1/2" I.D. (12.7mm)
Length (SX556-2) ................................15.5" (393.7mm)
Length (SX556-6) ................................22.5" (571.5mm)
Weight (SX556-2) .............................22.2 Lbs. (10.1 kg)
Weight (SX556-6) .............................26.2 Lbs. (11.9 kg)

Sunex Tools SX556-6 Specifications

General

Brand	Sunex Tools
Model	SX556-6
Category	Impact Driver
Language	English

Summary

Safety Warnings

General Safety Precautions

Read instructions, wear safety goggles, hearing protection, avoid vibration.

Product Specifications

Detailed Safety Instructions

Compressed Air Hazards

Never direct compressed air at yourself or others; detach tool before maintenance.

Hose Safety

Check for and replace damaged hoses. Do not use quick-detach couplings at the tool.

Tool Handling and Operation

Place tool on work before starting, keep balanced stance, avoid overreaching.

Vibration and Repetitive Motion

Discontinue use if discomfort occurs. Seek medical advice for persistent symptoms.

Protective Measures

Keep hair, jewelry, and loose clothing away from rotating parts.

Tool Usage Restrictions

Do not lubricate with flammable liquids, use in explosive atmospheres, or use hand sockets.

Operation and Maintenance

Air Supply Requirements

Operate at 90 psig. Use clean, dry air. Drain tank daily, clean filter screen weekly.

Lubrication

Lubricate motor daily with air tool oil. Do not overfill.

Troubleshooting Common Issues

Address loss of power or erratic action due to air supply, moisture, or grit.

Torque Measurement

Use a torque meter to check fasteners when specific torque is required.

Warranty Information

Parts Breakdown