Sunex Tools SXMC12 - User Manual

SXMC38 and SXMC12 07/01/16
Breakaway Torque .................................. 450 ft. lbs.
Working Torque .............................102 ~350 ft. lbs.
Free Speed ............................................ 7,000 RPM
Air Inlet .......................................................1/4" NPT
Recommended Hose Size ......................... 3/8" I.D.
Avg. Air Cons. ...........................................3.76 CFM
Sound Level ..................................................98 dbA
Weight ...........................................................2.9 lbs.
Length .............................................................. 4.29"
Vibration Level ........................................ 7.5 m/sec²
Breakaway Torque .................................. 500 ft. lbs.
Working Torque .............................102 ~350 ft. lbs.
Free Speed ............................................ 9,500 RPM
Air Inlet .......................................................1/4" NPT
Recommended Hose Size ......................... 3/8" I.D.
Avg. Air Cons. ...........................................3.76 CFM
Sound Level ..................................................98 dbA
Weight ...........................................................2.9 lbs.
Length .............................................................. 4.29"
Vibration Level ........................................ 7.5 m/sec²
SXMC38 - SPECIFICATIONS SXMC12 - SPECIFICATIONS
Operating Instructions • Warning Information • Parts Break down
SXMC38 and SXMC12
3/8" and 1/2" SUPER DUTY MINI
IMPACT WRENCH
© Copyright 2016, Sunex Tools
®
ALWAYS READ INSTRUCTIONS BEFORE
USING POWER TOOLS
ALWAYS WEAR SAFETY GOGGLES
ALWAYS WEAR HEARING PROTECTION
AVOID PROLONGED EXPOSURE TO VIBRATION
WARNING

Summary

Warning Information

General Warnings

Visual indicators and brief text advising on essential safety precautions like reading instructions, wearing eye and hearing protection, and avoiding vibration.

Detailed Safety Warnings

Comprehensive safety guidelines covering operation, maintenance, air supply, personal protective equipment, and potential hazards.

Product Specifications

SXMC38 Specifications

Details technical specifications for the SXMC38 model, including torque, speed, air consumption, weight, and vibration levels.

SXMC12 Specifications

Details technical specifications for the SXMC12 model, including torque, speed, air consumption, weight, and vibration levels.

Operation and Requirements

Air Supply Requirements

Guidelines for optimal air pressure, hose diameter, and air quality for tool performance and longevity.

Lubrication Procedure

Instructions for daily lubrication of the air motor and warnings about oil discharge after lubrication.

Operating Instructions

Steps for safe operation, including turning off air supply, handling fasteners, and using impact sockets.

Parts Breakdown

Illustrated Parts List

A detailed diagram and list of all components, part numbers, and quantities for the impact wrench.

Sunex Tools SXMC12 Specifications

General

Blows per Minute	1, 200 BPM
Average Air Consumption	4.2 CFM
Type	Pneumatic Impact Driver
Air Inlet	1/4 inch NPT
Minimum Hose Size	3/8 inch
Drive Size	1/2 inch