Sunex SX231B User Manual

SX231B: Parts Breakdown & Operating Manual Rev. 6/27/16
Operating Instructions • Warning Information • Parts Break down
SX231B
1/4" DRIVE MINI
AIR DIE GRINDER
© Copyright 2016, Sunex Tools
®
Max. Free Speed ............................25,000 RPM
Collect Size .................................................. 1/4"
Air Consumption ...................................... 4 CFM
Air Inlet ...................................................1/4 NPT
Air Pressure ............................................90 psig
Recommended Hose Size ....................3/8" I.D.
Length ........................................................ 5.13"
Weight ....................................................0.8 Lbs.
Sound Level ......................................... 94.5 dBA
SPECIFICATIONS
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
WARNING
RATED RPM OF ACCESSORY USED
MUST EXCEED THE MAXIMUM TOOL
RPM SHOWN
READ THIS MANUAL BEFORE
OPERATING TOOL
ALWAYS WEAR EYE PROTECTION
WHEN OPERATING OR PERFORMING
MAINTENANCE ON THIS TOOL
ALWAYS WEAR HEARING
PROTECTION WHEN OPERATING
THIS TOOL
AVOID PROLONGED EXPOSURE
TO VIBRATION
WARNING
RPMRPMRPM

Sunex SX231B Specifications

General

Type	Angle Grinder
Power Source	Pneumatic
No Load Speed	12, 000 RPM
Spindle Lock	Yes
Max RPM	12, 000 RPM
Air Consumption	4 CFM
Disc Diameter	4.5 inches
Wheel Diameter	4.5 inches
Arbor Size	5/8 inch
Air Inlet Size	1/4 in NPT

Summary

Product Specifications and Warnings

Specifications

Details technical specifications such as free speed, air consumption, pressure, and dimensions.

Chemical Exposure Hazards

Highlights chemicals in dust that can cause cancer, birth defects, or reproductive harm.

Operating Safety Precautions

Lists essential operating safety measures including eye, hearing protection, and vibration.

Important Safety Information

General Safety Guidelines

Provides comprehensive safety instructions for operating and maintaining the tool.

Accessory and Tool Usage Warnings

Details specific warnings related to accessory mounting and tool modifications.

Parts Breakdown

Assembly Components

Lists and illustrates all parts for the Motor Housing and Air Motor Assemblies.

Operation and Maintenance

Air Supply Requirements

Defines recommended air pressure, quality, and hookup procedures for optimal tool performance.

Troubleshooting Common Issues

Addresses potential causes for loss of power or erratic action and their solutions.

Lubrication and Maintenance

Provides daily lubrication instructions and maintenance guidance.

Operating Procedures

Guides on how to safely operate the tool, mount accessories, and handle potential hazards.

Limited Warranty Information

Warranty Terms

Outlines the one-year warranty, coverage, exclusions, and contact information.