Electronic Dartboard 25/40
player. Play continues until one player wins. GOOD LUCK!
Electronic Dartboard Operation
1. Press the POWER to activate dartboard. A short musical introduction is played as the display goes
through power-up test.
2. Press GAME button until desired game is displayed
3. Press DOUBLE button (optional) to select starting and/or ending on Doubles or Master Out (used
only in 301 - 901 games). This is explained in the game rules section.
4. Press PLAYER button to select the number of players (1, 2 ... 16). The default setting is 2 players.
Or select Cybermatch option by pressing CYBERMATCH button.
5. Press START/HOLD button (red) to activate game and begin play.
6. Throw darts: When all 3 darts have been thrown, a voice command will indicate “Remove Darts”
and the score will flash. The darts can now be removed without affecting the electronic scoring.
When all darts are removed from the playing surface press the START button to go to next player.
Voice command will indicate which player is up. Also, the player indicator lights will illuminate to
show which player’s turn it is.
Caring for your Electronic Dartboard
7. Never use metal tipped darts on this dartboard. Metal tipped darts will seriously damage the
circuitry and electronic operation of this dartboard.
8. Do not use excessive force when throwing darts. Throwing darts too hard will cause frequent tip
breakage and cause excess wear on the board.
9. Turn darts clockwise as you pull them from the board. This makes it easier to remove darts and
extends the life of the tips.
10. Use only the A/C adapter that comes with the dartboard. Using the wrong adapter may cause
electrical shock and damage to the electronic circuits.
11. Remove the batteries when not in use or if using the optional A/C adapter. This will prolong the life
of your batteries.
12. Do not spill liquids on the dartboard. Do not use spray cleaners, or cleaners that contain
ammonia or other harsh chemicals as they may cause damage.
To Next Page
Loading...