Need help?Do you have a question about the Sunforce 60031 and is the answer not in the manual?
General| Rated Current | 30A |
|---|---|
| Max. Input Voltage | 50V |
| Weight | 1.5 lbs |
| Output Voltage | 12V/24V |
| Maximum Load Current | 30A |
| Type | Charge Controller |
| System Voltage | 12V |
| Protection | Overload, Short Circuit |
| Display | LED |
Details risks of explosive gas and acid contact, with necessary precautions like ventilation and avoiding sparks.
Specifies maximum input voltage (23V) and charging current (12A) for safe operation and to avoid injury.
Provides physical dimensions and shows panel mount and wall mount versions of the controller.
Lists key features such as digital meter, battery protection, safety circuits, and status lights.
Guides on controller mounting options and step-by-step connection procedures for solar panels and batteries.
Illustrates how to connect the solar panel array and battery to the charge controller.
Details recommended wire gauge (AWG) for battery and solar array connections based on distance.
Explains the three-stage charging algorithm (Bulk, Constant Voltage, Float) and low voltage cutoff.
Lists electrical, charging, protection, mechanical, and environmental parameters of the controller.
Describes the meaning of the Power, Charging, and Charge Complete LEDs for status indication.
Recommends performing checks on wire connections, array, and battery cabling every 3 months.
Provides solutions for common issues like battery not charging or solar panel having no output.
Details the one-year limited warranty and contact information for warranty service.
To Next Page
