Sungrow DTSU666-20 - Page 14

25
When RS485 communicating, the telephone sign will flashes.
The communication address of Modbus protocol is 1 decimal data (1 ~ 254), and the factory
default baud rate is 9600bps, N.8.1; E1 means even check one stop bit, O1 means odd check
one stop bit, N2 means two stop bits without check, N1 means one stop bits without check.
12
13
14
10
11
First channel
Combined phase
active power
=1.090kW
First channel
Combined phase
active power
=1.101kW
First channel
Combined phase
active power
=1.100kW
First channel
Combined phase
power factor
PFt=0.500
First channel
Combined phase
power factor
PFa=1.000
Second channel
Combined phase
active power
=1.101kW
Second channel
Combined phase
active power
=1.100kW
Second channel
Combined phase
power factor
PFt=0.500
Second channel
Combined phase
power factor
PFa=1.000
15
First channel
Combined phase
power factor
PFb=0.500
Second channel
Combined phase
power factor
PFb=0.500
Second channel
Combined phase
power factor
PFc=-0.500
25
26
27
28
29
30