Need help?Do you have a question about the Sungrow SG100KU and is the answer not in the manual?
Describes the intended application of the SG100KU within a Grid-Connected PV system.
Covers electrical shock hazards, usage limitations, environmental conditions, and ESD protection.
Details the function and operation of the emergency stop button for shutting down the inverter.
Explains the function and operation of the AC and DC main switches for disconnecting power.
Provides the procedure for safely opening the SG100KU front door for access.
Lists the materials included in the SG100KU product crate.
Explains how to identify the SG100KU model using its nameplate information.
Provides instructions for proper storage of the SG100KU to protect it from damage and moisture.
Describes the SG100KU as a grid-connected inverter and its basic internal components.
Details the physical dimensions and weight of the SG100KU inverter.
Illustrates the bottom and top views of the SG100KU, including cable entry and air inlets/outlets.
Shows the location and types of electrical terminals available on the SG100KU.
Explains data display, fault indication, and serial data access capabilities of the SG100KU.
Covers grid requirements, ventilation, installation practices, personnel qualifications, and communication.
Presents a PV grid-connected system configuration using optional devices from SUNGROW.
Lists essential requirements for the normally operating of the SG100KU, including environmental conditions.
Details considerations for floor, clearance space, cable trenches, ventilation, and other protections.
Provides guidelines for classifying and installing power and control cables to minimize interference.
Specifies tightening torques for power cable connections and protection methods for cables.
Outlines the steps involved in the SG100KU installation process.
Describes the initial steps to check the packaging and the unit for damage and correct contents.
Lists the necessary tools for moving, fastening, and connecting the SG100KU unit.
Covers precautions and methods for transporting and shipping the SG100KU unit.
Details procedures for moving the SG100KU using forklifts, rail steels, or cranes after unpacking.
Covers unpacking the unit, placing it on the mounting surface, and fastening it to the floor.
Specifies recommended sizes for DC, AC, ground, and communication cables.
Identifies the parts used for connecting power cables to the SG100KU.
Details the steps required to open the SG100KU enclosure to begin electrical connections.
Explains how to open the cable entry and exit holes at the bottom of the SG100KU.
Provides instructions for making the DC input connections, including cable ratings and polarity.
Details the procedure for connecting the SG100KU to the AC grid, including phasing sequence.
Emphasizes the importance of proper grounding for safety and describes the connection process.
Details setting up serial communication via RS485 to a PC using a converter.
Details how to close the cable entry/exit holes after electrical connections are completed.
Lists mechanical, electrical, and other checks to ensure correct installation before commissioning.
Specifies checks and conditions that must be met before starting the SG100KU for the first time.
Covers checks for the PV array, SG100KU unit, ground connection, communication, and voltages.
Details the step-by-step process for starting the SG100KU inverter for the first time.
Describes checks for operating conditions and final verification after the SG100KU is commissioned.
Presents detailed DC, AC, mechanical, system, and communication parameters for the SG100KU.
Outlines conditions under which Sungrow Power Supply Co., Ltd. disclaims liability for product use or damages.
Provides Sungrow's company background and contact details for inquiries and support.
To Next Page
General
