Need help?Do you have a question about the Sungrow SG12KTL-M and is the answer not in the manual?
General| Max DC Input Voltage | 1100 V |
|---|---|
| Number of MPPT | 2 |
| Start Voltage | 200 V |
| Rated AC Output Current | 17.4 A |
| THDi | < 3 % |
| Protection Degree | IP65 |
| Protection Level | IP65 |
| DC Connection Type | MC4 |
| Rated Output Power | 12 kW |
| Input Voltage Range | 200 V - 1000 V |
| MPPT Voltage Range | 200 V - 1000 V |
| Rated AC Power | 12 kW |
| AC Output Voltage Range | 180-280 V |
| Grid Voltage Range | 180-280 V |
| Grid Frequency Range | 50/60 Hz |
| Operating Temperature Range | -25°C to 60°C |
| Max. DC Input Power | 18000 W |
| Max. DC Power | 18000 W |
| Cooling Method | Natural convection |
| Cooling Type | Natural convection |
Essential safety guidelines for handling and operating the inverter.
Safety instructions for mechanical and electrical installation phases.
Safety measures required during inverter operation and maintenance.
Specific warnings for ESD, service, and general notices.
Guidelines for choosing an optimal and safe location for the inverter.
Identification of connection terminals and AC side connection requirements.
Connecting PV arrays, DC cables, and grounding the inverter.
Ensuring all conditions are met before starting the inverter.
Steps to start the inverter and interpret LED indicator status.
Lists fault codes, descriptions, and troubleshooting steps.
To Next Page
