Need help?Do you have a question about the Sungrow SG285HX and is the answer not in the manual?
General| Model | SG285HX |
|---|---|
| Type | String Inverter |
| Max. DC Voltage | 1500 V |
| Max. Input Voltage | 1500 V |
| Number of MPPTs | 12 |
| Max. Input Current per MPPT | 26 A |
| Nominal Grid Frequency | 50 Hz / 60 Hz |
| THDi | <3% |
| Max. Efficiency | 99% |
| Maximum Efficiency | 99% |
| European Efficiency | 98.7% |
| DC Switch | Yes |
| Cooling Method | Smart forced air cooling |
| Nominal AC Output Power | 285 kW |
| Maximum AC Output Power | 285 kW |
| Max. AC Output Power | 285 kW |
| Power Factor at Nominal Power | >0.99 |
| Protection Class (According to IEC 62103) | Class I |
| Operating Ambient Temperature Range | -30°C to +60°C |
| Operating Temperature Range | -30°C to +60°C |
| Communication Interface | RS485, Ethernet |
Details safety precautions required during the inverter's installation process.
Provides critical safety guidelines and warnings for all electrical connections.
Lists essential safety measures to be followed during inverter operation.
Specifies safety precautions and procedures for performing inverter maintenance.
Details on the inverter's model description and physical appearance.
Details on the various functions and capabilities of the inverter, including PID.
Procedures for inspecting the product after receiving it.
Safety precautions to be taken during the mechanical installation process.
Criteria for selecting an optimal and safe location for mounting the inverter.
Specifies the environmental conditions suitable for inverter installation.
Specifies the necessary clearances around the inverter for heat dissipation and access.
Guidance on how to safely move the inverter.
Steps for installing the bracket used to mount the inverter.
Detailed instructions for mounting the inverter using a bracket.
Procedures for physically installing the inverter onto the prepared mounting structure.
Critical safety guidelines for performing electrical connections on the inverter.
Detailed steps and requirements for establishing the external protective grounding connection.
Procedures and requirements for connecting the AC power cables.
Safety and procedural guidelines for connecting the DC power cables from PV strings.
Checks to be performed before starting the inverter commissioning process.
Step-by-step guide for commissioning the inverter for the first time.
Procedures for updating the inverter's firmware using the mobile app.
Guidance on diagnosing and resolving common faults and error codes for the inverter.
General information and notices related to inverter maintenance.
Important safety notices and precautions to observe before performing maintenance.
Steps to safely disconnect the inverter from power sources for maintenance.
To Next Page