Need help?Do you have a question about the Sungrow SG2K-S and is the answer not in the manual?
Explains DANGER, WARNING, CAUTION, and NOTICE symbols for hazard communication and safety.
Details critical safety measures for handling and operating the inverter, including shock and burn risks.
Defines the inverter's intended application and critical warnings for proper operation to prevent damage.
Describes the basic functions of the inverter, including DC to AC conversion, data storage, parameter configuration, and protection mechanisms.
Defines the allowable grid voltage limits for inverter operation and protective actions against over/under-voltage.
Specifies the acceptable grid frequency limits for inverter operation and protective actions against frequency deviations.
Explains how the inverter regulates active power output in response to grid over-voltage conditions.
Details how the inverter adjusts power output based on grid frequency exceeding predefined thresholds, using derating curves.
Describes how the inverter adjusts power output in response to grid frequency drops below specified limits.
Explains the inverter's capabilities for controlling reactive power to support the grid, including PF and Q(U) modes.
Outlines critical safety measures, including electrical disconnection and handling precautions during mounting to prevent injury.
Specifies optimal mounting location criteria for safe operation, longevity, and performance, considering environment and accessibility.
Details environmental conditions (flammability, accessibility, temperature, humidity) for installation and requirements for the mounting carrier.
Provides step-by-step instructions for mounting the inverter using the wall-mounting bracket and expansion plugs, including alignment and drilling.
Details how to secure the inverter to the bracket with screws and install communication modules to the inverter.
Emphasizes crucial safety measures during electrical work, including PPE usage, handling high voltages, and disconnecting power sources.
Explains the procedure and requirements for establishing an additional grounding connection for enhanced safety and proper operation.
Details AC side requirements, including grid approval, voltage/frequency checks, and AC circuit breaker specifications for safe connection.
Provides step-by-step instructions for assembling the AC connector, including cable preparation, stripping, and sealing.
Guides on connecting the AC connector to the inverter terminals, including securing screws and PE conductor connection to the grounding bar.
Highlights safety warnings for DC cable connection, emphasizing electric shock hazards and potential inverter damage if requirements are not met.
Provides instructions for assembling PV connectors, ensuring IP65 protection and proper cable requirements like multi-core cables.
Guides on connecting the inverter to PV strings, including rotating the DC switch to OFF and checking polarity correctness.
Lists essential checks before starting the inverter, covering electrical connections, accessibility, and safety labels.
Outlines the step-by-step procedure for starting up the inverter, including country selection and parameter configuration.
Explains how to access and modify inverter parameters, requiring a password for protected settings.
Details how to configure protective parameters for grid voltage and frequency to ensure safe operation according to standards.
Provides step-by-step instructions for safely disconnecting the inverter from AC and DC power sources, including capacitor discharge.
Lists common error codes displayed on the inverter or app and provides corresponding troubleshooting steps for grid and transient faults.
Outlines safety precautions and procedures for inverter maintenance, emphasizing safety and component replacement by authorized personnel.
To Next Page
General