To Next PageTo Next Page
Need help?Do you have a question about the Sungrow SG3125HV-20 and is the answer not in the manual?
Product validity information.
Manual content overview.
Intended audience identification.
Explanation of manual symbols.
Guidance on using the manual.
Key terms and definitions.
Specifies the inverter's intended applications.
Critical safety guidelines for operation and maintenance.
Overview of the inverter's external design.
Description of the inverter's internal structure and components.
Lists the items included in the inverter package.
How to identify the inverter using its nameplate.
Procedure for inspecting the inverter for transit damage.
Guidelines for appropriate inverter storage.
Instructions for transporting the inverter.
Procedures and safety for hoisting the inverter.
Requirements and considerations for foundation installation.
Minimum clearance distances around the inverter.
Procedure for removing sealing tapes before operation.
Crucial safety guidelines for electrical installation.
Steps to prepare for making electrical connections.
Overview of circuit diagrams and cable connection methods.
Detailed instructions for DC cable connection.
Detailed instructions for AC cable connection.
Procedures for grounding the inverter and its components.
Instructions for establishing communication connections.
How to connect external power supply.
Final steps for completing electrical connections.
Overview of system power connection points.
Step-by-step guide to safely disconnect the system.
Step-by-step guide to safely reconnect the system.
Critical safety guidelines for commissioning.
Prerequisites and conditions for commissioning.
Pre-commissioning checks for cables and switches.
Steps to prepare the device before startup.
Procedure for starting the inverter.
How to set parameters via the LCD.
Final steps to complete the commissioning process.
Procedure for starting the inverter.
Procedure for stopping the inverter.
Overview of the LCD touchscreen interface.
Explanation of the default screen layout.
Structure of LCD menus and icons.
Procedure for entering the password to access settings.
How to change the display language.
Procedure for setting the date and time.
How to view real-time operational data.
How to access historical event, data, and fault logs.
How to view current fault status.
How to start and stop the inverter via LCD.
Procedure to restore factory default settings.
How to view firmware versions of LCD and DSP.
Overview of configurable LCD parameters.
Description of inverter operation modes.
How to configure active power limitation.
How to adjust reactive power output.
Inverter's capability to withstand low voltage events.
Inverter's capability to withstand high voltage events.
How temperature affects inverter performance.
Explanation of Maximum Power Point Tracking.
Inverter's smart temperature control system.
Functionality and troubleshooting of insulation monitoring.
Overview of the inverter's protection features.
Safety guidelines for performing troubleshooting.
Initial steps to check for system faults.
Common inverter faults and their solutions.
Troubleshooting for less common faults.
Safety guidelines for routine maintenance.
Overview of maintenance procedures and intervals.
Procedures for cleaning the inverter's interior and exterior.
Procedures for cosmetic repairs to the inverter surface.
Guidelines for replacing internal electrical components.
Technical specifications of the inverter system.
Recommended torque values for cable connections.
Disclaimers and limitations of liability.
Contact details for Sungrow support.
General