Need help?Do you have a question about the Sungrow SG350HX and is the answer not in the manual?
General| Max. PV input voltage | 1500 V |
|---|---|
| Rated AC output power | 350 kW |
| Max. efficiency | 99% |
| Cooling method | Smart Forced Air Cooling |
| Max. AC Output Power | 385 kVA |
| Nominal AC Output Power | 350 kW |
| Number of MPPTs | 12 |
| Max. Input Current per MPPT | 26 A |
| Nominal AC Voltage | 800 V |
| Power Factor | 0.8 leading to 0.8 lagging |
| THDi | <3% |
| Protection Degree | IP66 |
| Number of MPP Trackers | 12 |
| Output Frequency | 50 Hz / 60 Hz |
| Humidity Range | 0 - 100 % |
| Operating temperature range | -25°C to +60°C |
Safety precautions during product unpacking and initial checks.
Key safety measures for physical installation of the inverter.
Safety guidelines for using the inverter during operation.
Safety guidelines to follow before and during maintenance.
Safety during mounting, site selection criteria, and environmental conditions.
Procedures for moving the inverter manually or via hoisting.
Steps to install the mounting bracket for various mounting types.
Specific steps for mounting the inverter onto a bracket.
Specific steps for mounting the inverter on a wall.
Specific steps for mounting the inverter on a pole.
Securing the inverter to the mounted bracket.
Crucial safety guidelines for all electrical work.
Requirements and procedures for connecting the external protective ground.
General requirements for AC side connections and circuit breaker specifications.
Safety and procedures for connecting DC power from PV strings.
Essential checks and steps for initial inverter startup.
Common fault codes and their corrective measures.
Important safety precautions and notices before performing maintenance.
Procedures for safely shutting down and disconnecting the inverter.
Detailed technical data for all inverter models.
To Next Page