To Next PageTo Next Page
Need help?Do you have a question about the Sungrow SG30CX-P2 and is the answer not in the manual?
Essential safety precautions to be followed during the installation process.
Critical safety guidelines for all electrical connections to prevent hazards.
Safety measures to ensure safe operation of the inverter.
Safety precautions to be observed during maintenance activities.
Safety precautions to be observed during the mechanical installation process.
Criteria for selecting an appropriate and safe installation location for the inverter.
Critical safety guidelines for all electrical connection procedures.
Steps and requirements for establishing a reliable external protective ground connection.
Procedure for connecting the AC power cables to the inverter.
Detailed steps for connecting the DC input cables from PV strings.
Pre-commissioning checklist to ensure all installations are correct.
Step-by-step guide for the initial startup and configuration of the inverter.
Process for initializing the inverter using the iSolarCloud app.
Steps to safely disconnect the inverter from AC and DC power sources.
Information on fault codes and corrective measures for common issues.
Essential safety precautions to be followed during the installation process.
Critical safety guidelines for all electrical connections to prevent hazards.
Safety measures to ensure safe operation of the inverter.
Safety precautions to be observed during maintenance activities.
Safety precautions to be observed during the mechanical installation process.
Criteria for selecting an appropriate and safe installation location for the inverter.
Critical safety guidelines for all electrical connection procedures.
Steps and requirements for establishing a reliable external protective ground connection.
Procedure for connecting the AC power cables to the inverter.
Detailed steps for connecting the DC input cables from PV strings.
Pre-commissioning checklist to ensure all installations are correct.
Step-by-step guide for the initial startup and configuration of the inverter.
Process for initializing the inverter using the iSolarCloud app.
Steps to safely disconnect the inverter from AC and DC power sources.
Information on fault codes and corrective measures for common issues.
General| Model | SG30CX-P2 |
|---|---|
| Max. DC Voltage | 1100 V |
| Input Voltage Range | 200 V - 1000 V |
| MPPT Voltage Range | 200 V - 1000 V |
| Number of MPPTs | 2 |
| AC Voltage Range | 310 V - 480 V |
| Rated Grid Frequency | 50 Hz / 60 Hz |
| Output Frequency | 50 Hz / 60 Hz |
| Total Harmonic Distortion | < 3% |
| DC Switch | Yes |
| Max Efficiency | 98.7% |
| Rated Output Power | 30000 W |
| Rated AC Voltage | 400 V |
| Power Factor Adjustment Range | 0.8 leading - 0.8 lagging |
| Protection Class (According to IEC 62103) | Class I |
| Overvoltage Category (According to IEC 60664-1) | III |
| Operating Temperature Range | -25 °C ... +60 °C |
| Cooling Method | Natural Convection |
