To Next PageTo Next Page
Need help?Do you have a question about the Sungrow SG30CX and is the answer not in the manual?
General| Model | SG30CX |
|---|---|
| Type | String Inverter |
| Rated Power | 30 kW |
| Max. Input Voltage | 1100 V |
| Input Voltage Range | 200 V - 1000 V |
| Start Voltage | 200 V |
| Number of MPPTs | 2 |
| Max. Input Current per MPPT | 26 A |
| Number of Inputs per MPPT | 2 |
| Max. AC Power | 33 kVA |
| Rated AC Voltage | 400 V |
| Total Harmonic Distortion | < 3% |
| Max. Efficiency | 98.7% |
| DC Switch | Integrated |
| Protection Class | IP66 |
| Operating Temperature Range | -25 °C to +60 °C |
| MPPT Voltage Range | 200 V - 800 V |
| AC Voltage Range | 310 V - 480 V |
| Rated Grid Frequency | 50 Hz |
| Cooling Method | Natural convection |
| Dimensions (W x H x D) | 600 mm x 800 mm x 250 mm |
| Communication Interface | RS485, Ethernet |
Critical safety measures during product installation.
Essential safety precautions for electrical work.
Guidelines for safe operation of the inverter.
Safety measures for performing maintenance.
Detailed process for unpacking and initial inspection.
Critical safety precautions for mechanical installation.
Environmental and placement criteria for installation.
Safe procedures for relocating the inverter.
Step-by-step guide for bracket installation.
Final steps for mounting the inverter.
Detailed introduction to the inverter model and its features.
Visual identification of the inverter's external parts.
Paramount safety rules for electrical connections.
Procedure for establishing a reliable ground connection.
Detailed steps for connecting AC power cables.
Detailed steps for connecting DC power cables.
Pre-startup checks before initiating operation.
Step-by-step guide to start up the inverter.
Procedure for updating the inverter's firmware.
Steps to safely disconnect power from the inverter.
Diagnosing and resolving common inverter faults.
General procedures for maintaining the inverter.
