27
Wire cutter Wire stripper Hydraulic pliers Heat gun
Crimping tool
4–6mm
2
Connector wrench Multimeter
≥ 1100 Vdc
RJ45 crimping tool
Vacuum cleaner
4.4 Moving the Inverter
Before installation, remove the inverter from the packing case and move it to the installation
site. Follow the instructions below as you move the inverter:
• Always be aware of the weight of the inverter.
• Lift the inverter using the handles positioned on both sides of the inverter.
• Move the inverter by one or two people or by using a proper transport tool.
• Do not release the equipment unless it has been firmly secured.
User Manual 4 Mechanical Mounting
To Next Page
Loading...
Need help?
General