EasyManua.ls Logo

SunHome Luminar - Troubleshooting

SunHome Luminar
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4) TROUBLESHOOTING
Possibility
Repair Method
1
The bulb fuse is burned up.
Change a bulb.
2
The bulb and the soc ket are not
connected well.
3
The fuse is burned up.
Change a fuse. On the top of ceiling.
Possibility
Repair Method
1
The cable of control panel is not
connected well.
Check the cable connection a
nd fix it
properly.
2
The fuse is burned up.
Change fuse located on the top of ceiling
3
The indicator light of power is on,
but no led display
Most likely will need a new control panel
Phenomenon
Possibility
1 One of heaters
cannot heat.
1) The heater is not connected
properly
2) The heater needs replacement
2 All heaters cannot
heat.
1) The power plug is not connected
properly
2) The heaters are not
properly
connected
3) Relay malfunction
4) Control panel malfunction

Related product manuals