sunjoe GTS4000E - User Manual

To Next Page

, LLC

A Division of Snow Joe

, LLC

Model GTS4000E

Form No. SJ-GTS4000E-880E-M

OPERATOR’S MANUAL

SAVE THESE INSTRUCTIONS

LAWN + GARDEN MULTI-TOOL SYSTEM

HEDGE TRIMMER | POLE HEDGE TRIMMER | GRASS TRIMMER | GARDEN TILLER

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

You and any other operator of this power tool must read,

understand, and follow these instructions in their entirety.

Failure to follow these instructions may result in ELECTRIC

SHOCK, FIRE, and/or serious PERSONAL INJURY.

Notice the personal safety alert symbol m used in this

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

mWARNING! This unit can be dangerous! Careless or

improper use can cause serious injury.

mWARNING! The rotating blades can cut you. Keep

hands and feet away from the blades and the cutting area.

Before using the power tool, familiarize yourself with the

controls, especially how to stop the power tool in an

emergency. The only individuals who should use the power

tool are those who thoroughly understand these instructions

and know how to properly operate the unit. Children should

never be allowed access to the power tool.

Retain this manual for future reference and reread it at the start

of each season.

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Replacement parts – When servicing this unit, use only

identical replacement parts. Replace or repair damaged

cords immediately.

3. Keep children, bystanders, and pets away – All

spectators, including pets, should be kept a safe distance

away from the work area.

4. Know your product – Know how to start and stop the

machine. Be thoroughly familiar with the controls. Ensure

the controls (start/stop) function properly before using.

5. Use the right tool – Do not use this power tool for any job

except that for which it was intended.

6. Dress properly – Do not wear loose clothing or jewelry as

such articles can become caught in moving parts. Wear

a protective covering to contain long hair. Wearing rubber

gloves and substantial non-slip footwear is recommended

when working outdoors.

7. Extension cords – To prevent electric shock, use only

with an extension cord suitable for outdoor use.

8. Avoid accidental starting – Do not carry the power tool

with your nger on the switch. Make sure the switch is o

before plugging in or unplugging the unit.

mCAUTION! Moving parts will continue to run for several

seconds after turning o the machine.

9. Do not abuse the cord – Never carry the power tool

by the cord or yank the cord to disconnect it from the

receptacle. Keep the cord away from heat, oil, and sharp

edges.

10. Moving parts – Keep hands and feet away from moving

parts. Keep guards in place and in proper working order.

11. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

12. Do not overreach – Keep proper footing and balance at

all times.

13. Use safety glasses – Also use safety footwear, snug-

tting clothing, protective gloves, hearing, and head

protection.

14. Disconnect the tool – Disconnect the power tool from

the power supply when it is not in use, before servicing

it, when changing accessories, and when performing any

other maintenance task.

15. Store idle tool indoors – When not in use, the power tool

should be stored indoors in a dry and high or locked-up

place out of the reach of children.

16. Maintain the power tool with care – Keep the cutting

edges sharp and clean for optimal performance and

to reduce the risk of injury. Inspect the extension cord

periodically and immediately replace it if damaged. Keep

the handles dry, clean, and free from oil and grease.

Follow the additional recommendations described in the

maintenance section of this manual.

17. Avoid dangerous environments – Do not use the power

tool in rain or in damp or wet locations. Do not operate

the power tool in gaseous or explosive atmospheres or

use the power tool near ammable or combustible liquids.

Motors in these tools normally spark, and the sparks

might ignite fumes.

Main Page

Need help?

Do you have a question about the sunjoe GTS4000E and is the answer not in the manual?

Summary

Safety Instructions

General Safety Guidelines

Covers general safety rules for all operators, including area cleanliness, parts, children, product knowledge, proper dress, extension cords, starting, care, parts, forcing, and overreaching.

Specific Tool Safety Warnings

Details specific safety precautions for hedge trimmers, pole hedge trimmers, and grass trimmers, including blade safety, cord handling, and proper usage.